This item is made of a blend of walnut and hard maple woods. Every single detail was 100% handcrafted by me personally. There is a small speaker inside the back of the unit that you can plug into any CD/Tape player and listen to old swing music. Other versions available are in cherry, mahogany, and walnut. See website for more. Sold (but I have other flavors - see my website!) Prices start at $250.
This is a 1930's Atwater-Kent cathedral radio made with cherry wood. Hardwood flavors are cherry, walnut, or mahogany, and sell for $150-175 each, including the tiny speaker, light, and genuine radio grill cloth. These are HOT and were a huge hit at the IGMA Guild School.
The picture is somewhat distorted and does not do this delicate little tea/end table justice. It is of course handcrafted and made of 100% walnut, but cherry and mahogany flavors are also available. Note how very thin the legs are at the bottom - about 1/32 of an inch. US $95
A classic 1/12th scale miniature reproduction of French furniture. This desk is covered with 95% veneer, including the legs and marquetry. The inside has two working drawers and a slider lid. The outside lid opens to a formal leather writing surface. Sorry, this baby is now sold.
Replica of a cartonier bureau plat desk from the 19th century. Made mostly of cherry wood with a veneer top. Lyre-type side legs were the really big challenge. US $295.00 This one is sold! But see my website for others available with different woods and designs.
These are 6 sample 1/16" thick genuine hardwood parquet floors. They are typically sold in 6" x 6" pre-cut kits and sell starting at $20/kit. Variety of wood flavors used and cuts made determines price of each kit. Most can be used for both 1" and 1/4" scale rooms/floors. Woods vary per style of floor design: cherry, ebony, holly, mahogany, paduak, red cedar, walnut, etc. See my website at this link for larger pictures and prices for each parquet floor kit: http://www.tomwalden.name/Flooring.html.
This is your standard Pembroke style table with 2 drop-leaf sides. This one is made of snow white holly with walnut banding and legs. I also make pure holly or cherry tables. This table sells for $200, while others are less expensive without the banding or holly wood.
This is your standard Pembroke style table with 2 drop-leaf sides. This one is made of cherry but has a walnut veneer top. Both side leafs are upright to show you that the top was actually cut from a single piece of veneer - thus the sides are exactly matched to the center portion. I also make pure holly or cherry tables. This table sells for $200, while others are less expensive without the veneer.
This display stand is 2 5/8" high and 1 1/4" square and made of snow white holly wood. The 4 tiles on top are reversible. Reverse side of all 4 tiles is made of ebony. Bottom shelf is made of glass. Also have similar versions in cherry and walnut (see my website for their pictures). This display table will fit in any room, but great for foyers, hallways, and study/family rooms. Holly version is $85, cherry and walnut versions are $75 each.
This is a custom made startburst floor design made from 1/16" thick snow white holly, pure black ebony, and cherry woods. It measures almost 7" across its widest points. This is NOT a kit, it is already assembled and glued onto cardboard. It's use is for grand ballrooms, entranceways, etc. I also make these using other woods (have 12 different woods available in 1/16" thicknesses). Prices vary from $75-90 each, depending upon woods selected.
Artist: Tom Walden
